Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer XHT1141 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer XHT1141 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
XHT1141 is a high flow, high heat polycarbonate copolymer. It is the lowest heat product in the LEXAN XHT portfolio. It is available in a range of opaque and limited transparent colors.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 70 cm³/10min ISO 1133
温度 330 °C -
载荷 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2400 MPa ISO 527
屈服应力 65 MPa ISO 527
屈服伸长率 6.5 % ISO 527
断裂应力 60 MPa ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 2400 MPa ISO 178
简支梁冲击强度, +23°C, 3mm N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C, 3mm N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C, 3mm 16 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C, 3mm 12 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C, 3mm 14 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 3mm 10 kJ/m² ISO 180/1A
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 132 °C ISO 75-1/-2
热变形温度, 0.45 MPa 144 °C ISO 75-1/-2
维卡软化温度, B 150 °C ISO 306
维卡软化温度, 120°C/h 50N 152 °C ISO 306
其它性能价值单位Test Standard
吸水性 0.3 % 类似ISO 62
吸湿性 0.3 % 类似ISO 62
密度 1200 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 125 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 290 - 335 °C -
模具温度 85 - 130 °C -
1区 270 - 315 °C -
2区 280 - 325 °C -
3区 290 - 335 °C -
螺杆转速 40 - 90 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
特殊性能
透明.
应用
汽车
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.