Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL6013 - Europe - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL6013 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
LEXAN EXL6013 is especially developed for applications requiring a high impact performance combined with an improved chemical resistance over standard polycarbonate.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 5 cm³/10min ISO 1133
温度 300 °C -
载荷 1.2 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2100 MPa ISO 527
屈服应力 55 MPa ISO 527
屈服伸长率 7 % ISO 527
断裂应力 60 MPa ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 2150 MPa ISO 178
简支梁冲击强度, +23°C, 3mm N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C, 3mm N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C, 3mm 75 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C, 3mm 70 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C, 3mm 70 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 3mm 60 kJ/m² ISO 180/1A
球压硬度 90 MPa ISO 2039-1
热性能价值单位Test Standard
ISO数据
维卡软化温度, B 138 °C ISO 306
维卡软化温度, 120°C/h 50N 140 °C ISO 306
热导率 0.2 W/(m K) DIN 52616
灼热丝燃烧指数 (GWFI) 850 °C IEC 60695-2-12
GWFI - 测试用试样厚度 1 mm -
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 2.7 - IEC 62631-2-1
介质损耗因子, 1MHz 100 E-4 IEC 62631-2-1
体积电阻率 >1E13 Ohm*m IEC 62631-3-1
表面电阻率 >1E15 Ohm IEC 62631-3-2
相对漏电起痕指数 175 - IEC 60112
其它性能价值单位Test Standard
吸水性 0.35 % 类似ISO 62
吸湿性 0.15 % 类似ISO 62
密度 1200 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 2 - 4 h -
加工湿度 ≤0.02 % -
注塑熔体温度 290 - 320 °C -
模具温度 80 - 120 °C -
加料温度 60 - 80 °C -
1区 270 - 300 °C -
2区 280 - 310 °C -
3区 290 - 320 °C -
典型数据
加工方法
注塑
耐化学试剂
通用耐化学性
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.