Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of JAZZ 052/3 HS - PP-MX8 - PolyPacific Pty Ltd

Material Data Center offers the following functions for JAZZ 052/3 HS:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Jazz datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 17 g/10min ASTM D 1238
温度 230 °C -
负载 2.16 kg -
模压收缩率, 平行 0.011 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
拉伸强度 20 MPa ASTM D 638
弯曲模量 1200 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 300 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
热释放速率, 平行 80 E-6/K ASTM D 696
其它性能价值单位Test Standard
密度 960 kg/m³ ASTM D 792
典型数据
加工方法
注塑
供货形式
碎粒料
特殊性能
高冲击韧性的/经抗冲改性的
Certifications
回收树脂含量
应用
汽车
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.