Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GP2450NH-2 - PA9T-GF45 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

GENESTAR GP2450NH-2 is an injection molding grade with 45% GF developed for reflow applications. It is halogen-free and has a v0 flammability.

Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

GENESTAR GP2450NH-2 exhibits a good balance between mechanical properties, low warpage and a high processability, making it suitable for reflow components such as:

• DDR4 connectors
• USB 3.0 type C connectors
• wire-to-board and board-to-board connectors

加工/物理特性	价值	单位	Test Standard
ISO数据
模塑收缩率, 平行	0.2	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.7	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	15100	MPa	ISO 527
拉伸强度	150	MPa	ISO 527
断裂应力	146	MPa	ISO 527
断裂伸长率	1.5	%	ISO 527
弯曲模量, 23°C	13900	MPa	ISO 178
弯曲强度	220	MPa	ISO 178
简支梁缺口冲击强度, +23°C	9.3	kJ/m²	ISO 179/1eA
ASTM数据
拉伸强度	165	MPa	ASTM D 638
弯曲模量	13000	MPa	ASTM D 790
弯曲强度	224	MPa	ASTM D 790
悬臂梁缺口冲击强度, 1/8 in	100	J/m	ASTM D 256

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	306	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	125	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	280	°C	ISO 75-1/-2
厚度为h时的燃烧性	V-0	class	IEC 60695-11-10
测试用试样的厚度	0.4	mm	-
ASTM数据
UL94 燃烧性	V-0	-	UL 94
DTUL @ 264 psi	285	°C	ASTM D 648
熔点	306	°C	ASTM D 3418
玻璃化转变温度	125	°C	ASTM E 1356

电性能	价值	单位	Test Standard
ISO数据
相对漏电起痕指数	600	-	IEC 60112
ASTM数据
电介质强度, 短时	30	kV/mm	ASTM D 149
体积电阻率	>1E15	Ohm*cm	ASTM D 257

其它性能	价值	单位	Test Standard
吸水性	0.1	%	类似ISO 62
密度	1530	kg/m³	ISO 1183
密度	1530	kg/m³	ASTM D 792

函数

典型数据

加工方法

注塑

特殊性能

阻燃的, 无卤, 经热稳处理的/耐热的

特征

低翘曲, 可焊的

应用

电子电气

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.