Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clyrell RC213M - PP - LyondellBasell Industries

Material Data Center offers the following functions for Clyrell RC213M:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clyrell datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 10 g/10min ISO 1133
温度 230 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1050 MPa ISO 527
屈服应力 27 MPa ISO 527
屈服伸长率 10 % ISO 527
断裂伸长率 >50 % ISO 527
简支梁缺口冲击强度, +23°C 3.4 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 1.5 kJ/m² ISO 179/1eA
肖氏硬度D 66 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
热变形温度, 0.45 MPa 65 °C ISO 75-1/-2
维卡软化温度, A 130 °C ISO 306
光学特性价值单位Test Standard
ASTM数据
光泽度 90 - ASTM D 2457
雾度 1 % ASTM D 1003
其它性能价值单位Test Standard
密度 900 kg/m³ ISO 1183
机械性能(薄膜)价值单位Test Standard
ASTM Data
屈服应力, 平行 22 MPa ASTM D 882
断裂拉伸强度, 平行 35 MPa ASTM D 882
屈服伸长率, 平行 10 % ASTM D 882
断裂伸长率, 平行 750 % ASTM D 882
挤出形式 陆陇 - -
试样厚度 0.05 mm -
典型数据
加工方法
薄膜挤出成型
添加剂
防结块剂
特征
可热封的, 可焊的, 共聚物, 随机共聚物
Certifications
可食品接触的, 1935/2004/EC认证, 10/2011认证, FDA 21 CFR认证
应用
包装
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.