Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of ALTECH PA6 A 2015/512 GF15 IM UV - PA6-I-GF15 - MOCOM Compounds GmbH & Co. KG
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Altech datasheets, application examples or technical articles are available in Material Data Center
材料类型 | 聚酰胺6 |
填充/添加剂体系 | 15 % 玻纤,抗UV |
市场分类 | 汽车,建筑,多样的 |
应用范围 | 冷却系统,燃油系统,齿轮,滚柱轴承,多样的 |
主要应用 | 油泵部件,轴承和滑动元件,发动机罩盖,多样的 |
机械性能 | 干 / 已调节 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
拉伸模量 | 5300 / - | MPa | ISO 527 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
无缺口简支梁冲击强度, +23°C | 65 / - | kJ/m² | ISO 179/1eU | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
简支梁缺口冲击强度, +23°C | 10 / - | kJ/m² | ISO 179/1eA |
热性能 | 干 / 已调节 | 单位 | Test Standard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
热变形温度, 1.80 MPa | 201 / * | °C | ISO 75-1/-2 |
其它性能 | 干 / 已调节 | 单位 | Test Standard |
密度 | 1220 / - | kg/m³ | ISO 1183 |
烘干条件 | 80 °C 在干燥空气(除湿)干燥器里 for 2-12 h 取决于湿度含量 不必要的 <0,15 % |
注塑成型工艺 | 注塑熔体温度 270-290 °C 注塑模具温度 80-100 °C |
储存 | 干燥,避免光照 不高于30°C |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.