Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styrolux® 3G46 - SB - INEOS Styrolution

Check here, which other Styrolux datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Styrolux® 3G46 is a clear styrene-butadiene copolymer (SBC) developed specifically for sheet- and film extrusion and for thermoformed articles. Styrolux® 3G46 is designed for improved performance in blends with general-purpose polystyrene, providing parts with an excellent balance of transparency and toughness.

Suggested applications include the whole array of food and non-food packaging like blister packs, drink cups, caps and lids, deli-trays and sheeting.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	12	cm³/10min	ISO 1133
温度	200	°C	-
载荷	5	kg	-
熔体密度	910	kg/m³	-
熔体	0.16	W/(m K)	-
熔体的比热	2300	J/(kg K)	-
喷射温度	71	°C	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	1550	MPa	ISO 527
屈服应力	27	MPa	ISO 527
屈服伸长率	2	%	ISO 527
名义断裂伸长率	>50	%	ISO 527
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	3	kJ/m²	ISO 179/1eA

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	58	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	75	°C	ISO 75-1/-2
维卡软化温度, B	51	°C	ISO 306
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.6	mm	-
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	3.2	mm	-

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	2.5	-	IEC 62631-2-1
相对介电常数., 1MHz	2.5	-	IEC 62631-2-1
体积电阻率	>1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E15	Ohm	IEC 62631-3-2

其它性能	价值	单位	Test Standard
吸水性	0.07	%	类似ISO 62
吸湿性	0.07	%	类似ISO 62
密度	1020	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑, 薄膜挤出成型, 片材挤出成型, 吹塑

特殊性能

消毒, 环氧乙烷灭菌(EtO), Gamma irradiation sterilization

耐化学试剂

抗辐射性

Certifications

可食品接触的, 10/2011认证, FDA 21 CFR认证, 医用级, Biocompatibility ISO 10993, US药物六级认证, Drug Master File, Long term supply assurance

应用

药物

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PROCESSING
injection molding, Melt temperature, range: 180 - 250 °C
injection molding, Melt temperature, recommended: 220 °C
injection molding, Mold temperature, range: 30 - 50 °C
injection molding, Mold temperature, recommended: 40 °C

薄膜挤出成型

PROCESSING
Extrusion, Flat film, Melt temperature: 190 - 230 °C

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.