Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SMCarbon® 90 CF50-12K - EP-CF50 - Polynt S.p.A.

Material Data Center offers the following functions for SMCarbon® 90 CF50-12K:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other SMCarbon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Shelf life at -18°C: 6 months
Shelf life at RT 23°C: 4 weeks
Fibre length: 25 mm
Fibre: 12K
Area weight: 1500 g/m2
Typical Cure temperature: 135 - 145 °C
Typical moulding pressure: 80 - 120 bar
Typical Cure time: 90 sec/mm
加工/物理特性价值单位Test Standard
ISO数据
模塑收缩率, 平行 -0.1 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 29400 MPa ISO 527
拉伸强度 195 MPa ISO 527
简支梁冲击强度, +23°C 52 kJ/m² ISO 179/1eU
Other Standards[S]
弯曲模量, 23°C 23800 MPa ISO 14125
弯曲强度 322 MPa ISO 14125
S: These properties are reported by the producer according standards that are different to our defaults.
热性能价值单位Test Standard
ISO数据
玻璃化转变温度, 10°C/min 150 °C ISO 11357-1/-2
其它性能价值单位Test Standard
密度 1460 kg/m³ ISO 1183
典型数据
加工方法
模压成型
供货形式
片状模材料
应用
汽车
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.