Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX2630F - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PX2630F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
NORYL PX2630F resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high impact extrusion grade exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. NORYL PX2630F is FDA food contact compliant. *See NORYL PX2630 resin for NON FDA version.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 3.8 g/10min ASTM D 1238
温度 250 °C -
负载 10 kg -
机械性能价值单位Test Standard
ASTM数据
弯曲模量 2090 MPa ASTM D 790
弯曲强度 76 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 330 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 264 psi 126 °C ASTM D 648
其它性能价值单位Test Standard
密度 1060 kg/m³ ASTM D 792
典型数据
加工方法
其它挤出成型
特殊性能
高冲击韧性的/经抗冲改性的
特征
无定形, 低翘曲
耐化学试剂
水解稳定
Certifications
可食品接触的, FDA 21 CFR认证
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.