Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin PX1185 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin PX1185 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
NORYL™ PX1185 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This lubricated, impact modified, extrusion grade was developed for automotive trim applications and offers high heat resistance, good impact resistance, low specific gravity, and dimensional stability.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 12 cm³/10min ISO 1133
温度 280 °C -
载荷 10 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 1500 MPa ISO 527
屈服应力 30 MPa ISO 527
屈服伸长率 2.5 % ISO 527
断裂应力 35 MPa ISO 527
断裂伸长率 50 % ISO 527
简支梁缺口冲击强度, +23°C 22 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 8 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C, 4mm 25 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 8 kJ/m² ISO 180/1A
热性能价值单位Test Standard
ISO数据
维卡软化温度, B 110 °C ISO 306
维卡软化温度, 120°C/h 50N 120 °C ISO 306
热导率 0.22 W/(m K) DIN 52616
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 2.6 - IEC 62631-2-1
介质损耗因子, 1MHz 9 E-4 IEC 62631-2-1
体积电阻率 1E13 Ohm*m IEC 62631-3-1
其它性能价值单位Test Standard
吸水性 0.19 % 类似ISO 62
吸湿性 0.06 % 类似ISO 62
密度 1060 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 - 100 °C -
预干燥-时间 2 - 3 h -
注塑熔体温度 280 - 300 °C -
模具温度 60 - 100 °C -
加料温度 60 - 80 °C -
1区 240 - 260 °C -
2区 260 - 280 °C -
3区 280 - 300 °C -
典型数据
加工方法
注塑, 异型材挤出成型
特殊性能
高冲击韧性的/经抗冲改性的
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.