Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NH8006 Asia - (PPE+PS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NH8006 Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
NORYL NH8006 resin is a 30% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA and V0 at 2mm along with a UL746C Outdoor Suitability rating of F1. NORYL NH8006 resin offers an exceptional balance of strength and dimensional stability and is an excellent candidate for electrical and electronic applications.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 6 cm³/10min ISO 1133
温度 280 °C -
载荷 10 kg -
ASTM数据
熔融指数, MFI 2.1 g/10min ASTM D 1238
温度 280 °C -
负载 5 kg -
模压收缩率, 平行 0.00225 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
拉伸模量 9000 MPa ISO 527
屈服应力 125 MPa ISO 527
屈服伸长率 1.8 % ISO 527
断裂应力 125 MPa ISO 527
断裂伸长率 1.8 % ISO 527
弯曲模量, 23°C 8000 MPa ISO 178
简支梁缺口冲击强度, +23°C 9 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C 26 kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C 8 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 8 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
ASTM数据
拉伸模量 9500 MPa ASTM D 638
屈服应力 125 MPa ASTM D 638
断裂拉伸强度 125 MPa ASTM D 638
屈服伸长率 2 % ASTM D 638
断裂伸长率 2 % ASTM D 638
弯曲模量 8600 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 85 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 75 J/m ASTM D 256
温度 -30 °C -
Izod冲击强度, 1/8 in 500 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 149 °C ISO 75-1/-2
维卡软化温度, B 156 °C ISO 306
线性热膨胀系数, 平行 37 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 55 E-6/K ISO 11359-1/-2
灼热丝燃烧指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 测试用试样厚度 3.2 mm -
ASTM数据
热释放速率, 平行 37 E-6/K ASTM D 696
热释放速率, 垂直 55 E-6/K ASTM D 696
DTUL @ 264 psi 149 °C ASTM D 648
维卡温度 156 °C ASTM D 1525
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 3.1 - IEC 62631-2-1
介质损耗因子, 1MHz 40 E-4 IEC 62631-2-1
表面电阻率 5E17 Ohm IEC 62631-3-2
介电强度 16 kV/mm IEC 60243-1
ASTM数据
耗散因素, 1 MHz 0.004 - ASTM D 150
电介质常数, 1 MHz 3.11 - ASTM D 150
表面电阻率 4E17 Ohm ASTM D 257
其它性能价值单位Test Standard
吸水性 0.23 % 类似ISO 62
吸湿性 0.07 % 类似ISO 62
密度 1340 kg/m³ ISO 1183
密度 1330 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 110 - 120 °C -
预干燥-时间 2 - 3 h -
注塑熔体温度 300 - 320 °C -
模具温度 100 - 130 °C -
加料温度 80 - 100 °C -
1区 260 - 280 °C -
2区 280 - 300 °C -
3区 300 - 320 °C -
喷嘴温度 280 - 300 °C -
典型数据
加工方法
注塑, 其它挤出成型
特殊性能
阻燃的, 无卤
特征
防蠕变
应用
电子电气
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.