Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUVOSINT TPU X97A-1 WT - TPU - LEHVOSS Group

Material Data Center offers the following functions for LUVOSINT TPU X97A-1 WT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Luvosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 3D Data
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 46 cm³/10min ISO 1133
温度 190 °C -
载荷 10 kg -
机械性能价值单位Test Standard
ISO数据
肖氏硬度A 97 - ISO 7619-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 180 °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 4 °C ISO 11357-1/-2
其它性能价值单位Test Standard
密度 1200 kg/m³ ISO 1183
3D Data价值单位Test Standard
Other Standards[S]
拉伸强度, flat 26[1] MPa DIN 53504
拉伸强度, upright 15[2] MPa DIN 53504
断裂伸长率, flat 210[1] % DIN 53504
断裂伸长率, upright 134[2] % DIN 53504
1: XY-direction  2: ZX-direction  S: These properties are reported by the producer according standards that are different to our defaults.
典型数据
加工方法
Additive Manufacturing, 镭射烧结
供货形式
粉料, 白色
应用
运动器械
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.