Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXD911A Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXD911A Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Transparent/translucent PC for light diffusion special effects.  MFR of 20. Brominated FR.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 20 g/10min ASTM D 1238
温度 300 °C -
负载 1.2 kg -
机械性能价值单位Test Standard
ASTM数据
拉伸模量 1580 MPa ASTM D 638
屈服应力 63 MPa ASTM D 638
断裂拉伸强度 67 MPa ASTM D 638
断裂伸长率 130 % ASTM D 638
弯曲模量 2170 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 694 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
厚度为h时的燃烧性 V-2 class IEC 60695-11-10
测试用试样的厚度 1.0 mm -
Yellow Card 现存 是的 - -
ASTM数据
DTUL @ 66 psi 135 °C ASTM D 648
DTUL @ 264 psi 122 °C ASTM D 648
电性能价值单位Test Standard
ISO数据
相对漏电起痕指数 325 - IEC 60112
ASTM数据
耐电弧性 30 s ASTM D 495
其它性能价值单位Test Standard
密度 1200 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.02 % -
注塑熔体温度 275 - 300 °C -
模具温度 70 - 95 °C -
1区 255 - 275 °C -
2区 265 - 290 °C -
3区 275 - 300 °C -
喷嘴温度 270 - 295 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
特殊性能
阻燃的, 透明., Translucent
特征
光散射
应用
电子电气
地区供应
北美, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.