Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer HPH4504H - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer HPH4504H:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 光学特性 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
LEXAN HPH4504H resin is based on high heat Polycarbonate (PC) siloxane copolymer with enhanced autoclavability for medical devices and pharmaceutical applications. Added features of this grade include: Biocompatible (ISO10993 of USP Class VI). EtO, Steam, Gamma and e-Beam Sterilizable.

UL Yellow Card Link E121562-101338226
UL Yellow Card Link E207780-104532457
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 12 cm³/10min ISO 1133
温度 330 °C -
载荷 2.16 kg -
ASTM数据
熔融指数, MFI 3 g/10min ASTM D 1238
温度 300 °C -
负载 1.2 kg -
模压收缩率, 平行 0.0075 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
拉伸模量 2260 MPa ISO 527
屈服应力 65 MPa ISO 527
屈服伸长率 7 % ISO 527
断裂应力 65 MPa ISO 527
断裂伸长率 >50 % ISO 527
弯曲模量 2120 MPa ISO 178
弯曲强度 66 MPa ISO 178
简支梁缺口冲击强度, +23°C 15 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C, 4mm 13 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 11 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, +23°C 13 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 11 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
ASTM数据
拉伸模量 2090 MPa ASTM D 638
屈服应力 65 MPa ASTM D 638
断裂拉伸强度 71 MPa ASTM D 638
屈服伸长率 7 % ASTM D 638
断裂伸长率 122 % ASTM D 638
弯曲模量 2020 MPa ASTM D 790
弯曲强度 95 MPa ASTM D 790
洛克硬度 R 122 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 640 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 144 J/m ASTM D 256
温度 -30 °C -
Izod冲击强度, 1/8 in 3200 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 132 °C ISO 75-1/-2
维卡软化温度, B 154 °C ISO 306
维卡软化温度, 120°C/h 50N 155 °C ISO 306
线性热膨胀系数, 平行 60 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 60 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
Yellow Card 现存 是的 - -
ASTM数据
热释放速率, 平行 60 E-6/K ASTM D 696
热释放速率, 垂直 60 E-6/K ASTM D 696
DTUL @ 264 psi 143 °C ASTM D 648
维卡温度 160 °C ASTM D 1525
热导率, 固态 0.21 W/(m K) ASTM C 177
比热 1260 J/(kg K) ASTM C 351
电性能价值单位Test Standard
ASTM数据
电介质强度, 短时 20.3 kV/mm ASTM D 149
耗散因素, 60 Hz 0.0012 - ASTM D 150
电介质常数, 60 Hz 3.15 - ASTM D 150
电介质常数, 1 MHz 3 - ASTM D 150
体积电阻率 2.6E17 Ohm*cm ASTM D 257
光学特性价值单位Test Standard
ASTM数据
雾度 1 % ASTM D 1003
光透射率 85 % ASTM D 1003
折射率 1.6 - ASTM D 542
其它性能价值单位Test Standard
吸水性 0.16 % 类似ISO 62
吸湿性 0.35 % 类似ISO 62
密度 1200 kg/m³ ISO 1183
吸水率, 24小时 0.16 % ASTM D 570
密度 1190 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.02 % -
注塑熔体温度 340 - 360 °C -
模具温度 80 - 115 °C -
1区 315 - 340 °C -
2区 325 - 350 °C -
3区 340 - 360 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的, 透明., Translucent, 消毒, 环氧乙烷灭菌(EtO), 蒸汽灭菌, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
特征
共聚物
耐化学试剂
抗辐射性
Certifications
医用级, Biocompatibility ISO 10993, US药物六级认证
应用
药物, 包装
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.