Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL8134 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL8134 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
LEXAN EXL8134 is a PC/siloxane copolymer resin with high flow, excellent low temperature impact and 30% post consumer recycle content. Limited availability and restricted color only. Higher color variability and contamination risks including black specs needs to be considered before approval for use in applications.

UL Yellow Card Link E207780-100656422
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 15 g/10min ASTM D 1238
温度 300 °C -
负载 1.2 kg -
机械性能价值单位Test Standard
ASTM数据
拉伸模量 2200 MPa ASTM D 638
屈服应力 57 MPa ASTM D 638
断裂拉伸强度 55 MPa ASTM D 638
屈服伸长率 6 % ASTM D 638
断裂伸长率 100 % ASTM D 638
弯曲模量 2100 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 800 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 650 J/m ASTM D 256
温度 -40 °C -
热性能价值单位Test Standard
ISO数据
厚度为h时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
灼热丝燃烧指数 (GWFI) 850 °C IEC 60695-2-12
灼热丝燃烧指数 (GWFI) 960 °C IEC 60695-2-12
灼热丝引燃温度 (GWIT) 875 °C IEC 60695-2-13
GWIT - 测试用试样厚度 1 mm -
灼热丝引燃温度 (GWIT) 875 °C IEC 60695-2-13
GWIT - 测试用试样厚度 3 mm -
ASTM数据
DTUL @ 264 psi 123 °C ASTM D 648
维卡温度 145 °C ASTM D 1525
电性能价值单位Test Standard
ASTM数据
电介质强度, 短时 15 kV/mm ASTM D 149
耗散因素, 1 MHz 0.0092 - ASTM D 150
电介质常数, 1 MHz 3 - ASTM D 150
表面电阻率 1E15 Ohm ASTM D 257
体积电阻率 1E15 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
密度 1200 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 °C -
预干燥-时间 3 - 4 h -
加工湿度 ≤0.02 % -
注塑熔体温度 295 - 315 °C -
模具温度 70 - 95 °C -
1区 270 - 295 °C -
2区 280 - 305 °C -
3区 295 - 315 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
Certifications
回收树脂含量
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.