Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory GTR 45 natural - PA6I/6T - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Product-nomenclature: ISO 16396-PA6I/6T,,FT,C11-030

 

Partially aromatic Polyamide

Product Attributes

Improved heat resistance, Highly transparent, Barrier material

Markets

	Automotive
	Interior
	Electricals & Electronics
	Electrical appliances
	Industry & Consumer goods
	Housewares
	Packaging
	Injectionstretchblowmoulded containers, Cosmetics / Personal care, Medical packaging

Approvals

	Burning Behaviour
	UL V2
	Food Contact
	EU Requirements, FDA
	Medical
	USP VI, ISO 10993
	Potable Water Contact
	NSF 61

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
模塑收缩率, 平行	0.3 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.5 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	3000 / 3000	MPa	ISO 527
屈服应力	100 / 100	MPa	ISO 527
屈服伸长率	5 / 5	%	ISO 527
名义断裂伸长率	>50 / >50	%	ISO 527
简支梁缺口冲击强度, +23°C	8 / 8	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	8 / 2	kJ/m²	ISO 179/1eA
肖氏硬度D	85 / *	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	125 / *	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	120 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	105 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	115 / *	°C	ISO 75-1/-2
线性热膨胀系数, 平行	60 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	60 / *	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	V-2 / *	class	IEC 60695-11-10
测试用试样的厚度	0.8 / *	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	1E12 / 1E12	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E13	Ohm	IEC 62631-3-2
介电强度	27 / 27	kV/mm	IEC 60243-1
相对漏电起痕指数	- / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	7 / *	%	类似ISO 62
吸湿性	2 / *	%	类似ISO 62
密度	1180 / -	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑

供货形式

碎粒料, 自然色

特殊性能

经热稳处理的/耐热的, 透明.

特征

防护性能

Certifications

可食品接触的, FDA 21 CFR认证, 可水接触的, NSF认证 61, 医用级, Biocompatibility ISO 10993, US药物六级认证

应用

汽车, 电子电气, 药物, 包装

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.