Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid L 25 G natural 6011 - PA12 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grilamid L 25 G natural 6011:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能 - 机械性能(薄膜)
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Product-nomenclature: ISO 16396-PA12,,E,C24-010

 

Product Attributes

  High viscosity, Improved flowability and demoulding, Improved heat resistance

Markets

  Packaging
  Non oriented film

Approvals

  Food Contact
  EU Requirements, FDA
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 20 / * cm³/10min ISO 1133
温度 275 / * °C -
载荷 5 / * kg -
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 - / 1100 MPa ISO 527
简支梁缺口冲击强度, +23°C - / 10 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C - / 7 kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 178 / * °C ISO 11357-1/-3
光学特性干 / 已调节单位Test Standard
ISO Data
光泽度, 60° 150 / * - ISO 2813
其它性能干 / 已调节单位Test Standard
吸水性 1.5 / * % 类似ISO 62
吸湿性 0.7 / * % 类似ISO 62
密度 1010 / - kg/m³ ISO 1183
机械性能(薄膜)干 / 已调节单位Test Standard
ISO数据
屈服应力, 平行 35 / * MPa ISO 527-3
屈服应力, 垂直 35 / * MPa ISO 527-3
屈服应变., 平行 6 / * % ISO 527-3
屈服应变., 垂直 6 / * % ISO 527-3
最大应变, 平行 850 / * % ISO 527-3
最大应变, 垂直 900 / * % ISO 527-3
埃尔曼多夫撕裂强度, 平行 10 / * N ISO 6383-2
埃尔曼多夫撕裂强度, 垂直 10 / * N ISO 6383-2
继续撕裂强度, 平行 20 / * N/mm ISO 6383-1
继续撕裂强度, 垂直 25 / * N/mm ISO 6383-1
下水蒸汽透过率, 23°C/85%RH 8 / * g/(m²*d) ISO 15106-1/-2
下氧气透过率, 23°C/0%RH 350 / * cm³/(m²*d*bar) ISO 15105-1/-2
下氧气透过率, 23°C/85%RH 370 / * cm³/(m²*d*bar) ISO 15105-1/-2
下二氧化炭透过率, 23°C/0%RH 1500 / * cm³/(m²*d*bar) ISO 15105-1/-2
下二氧化炭透过率, 23°C/85%RH 1600 / * cm³/(m²*d*bar) ISO 15105-1/-2
典型数据
加工方法
薄膜挤出成型, 其它挤出成型
供货形式
碎粒料, 自然色
添加剂
润滑剂
特殊性能
经光稳处理的/耐光的, 经热稳处理的/耐热的
Certifications
可食品接触的, FDA 21 CFR认证
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.