Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ N1006D-H31 - PA9T - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Genestar N1006D-H31 Black is standard unreinforced extrusion grade.

Main feature of N1006D-H31 are:

• Chemical resistance
• Long term heat resistance

Examples of application are:

• Tube applications

Abrasion properties (JIS K7218-A)

Critical PV value: 750 kg/cm²•cm/sec
Coefficient of Friction (P=10kgf/cm²): 0.15
Wear (P=10kgf/cm²): 180 mg

加工/物理特性	价值	单位	Test Standard
ISO数据
模塑收缩率, 平行	1.7	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.7	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	1400	MPa	ISO 527
屈服应力	50	MPa	ISO 527
屈服伸长率	7	%	ISO 527
无缺口简支梁冲击强度, +23°C	N	kJ/m²	ISO 179/1eU

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	264	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	125	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	105	°C	ISO 75-1/-2

其它性能	价值	单位	Test Standard
吸水性	0.25	%	类似ISO 62
密度	1060	kg/m³	ISO 1183

函数

典型数据

加工方法

其它挤出成型

特殊性能

经热稳处理的/耐热的

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.