Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ N1002A-M41 - PA9T - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Genestar N1002A-M41 Black is a PTFE-lubricated, low friction injection molding grade provided as pellets.

Main feature of N1002A-M41 are:

• A low friction coefficient
• Low wear
• performance at high temperatures

Examples of application are:

• Friction and wear application
• Gears

加工/物理特性	价值	单位	Test Standard
ISO数据
模塑收缩率, 平行	1.4	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.5	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2560	MPa	ISO 527
屈服应力	80	MPa	ISO 527
屈服伸长率	6	%	ISO 527
无缺口简支梁冲击强度, +23°C	5	kJ/m²	ISO 179/1eU

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	300	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	125	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	125	°C	ISO 75-1/-2
ASTM数据
热释放速率, 平行	66	E-6/K	ASTM D 696
热释放速率, 垂直	67	E-6/K	ASTM D 696

其它性能	价值	单位	Test Standard
吸水性	0.25	%	类似ISO 62
密度	1170	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑

供货形式

黑色

添加剂

润滑剂, 脱模助剂

特殊性能

经热稳处理的/耐热的

特征

防护性能, 防蠕变, 防老, 高结晶度, 热稳定性, Tribologic Grade, 可焊的

耐化学试剂

耐酸性, 耐碱性, 通用耐化学性, 耐环境应力裂纹性, 耐溶剂性, 耐油脂性, 水解稳定, 耐油性

应用

汽车, 通用

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.