Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fiberfil® PP-61/TC/20/UV - PP-K20 - LyondellBasell Industries

Material Data Center offers the following functions for Fiberfil® PP-61/TC/20/UV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Fiberfil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 17 g/10min ASTM D 1238
温度 230 °C -
负载 2.16 kg -
模压收缩率, 平行 0.01 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
拉伸模量 2140 MPa ASTM D 638
拉伸强度 26.2 MPa ASTM D 638
屈服伸长率 30 % ASTM D 638
弯曲模量 2000 MPa ASTM D 790
弯曲强度 37.2 MPa ASTM D 790
洛克硬度 R 85 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 53 J/m ASTM D 256
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 76.7 °C ASTM D 648
DTUL @ 264 psi 71.1 °C ASTM D 648
其它性能价值单位Test Standard
吸水率, 24小时 0.2 % ASTM D 570
密度 1050 kg/m³ ASTM D 792
加工推荐(注塑)价值单位Test Standard
预干燥-温度 77 °C -
预干燥-时间 2 h -
加工湿度 ≤0.2 % -
注塑熔体温度 199 - 232 °C -
模具温度 32 - 71 °C -
1区 199 - 210 °C -
2区 204 - 227 °C -
3区 182 - 199 °C -
喷嘴温度 182 - 193 °C -
背压 0 - 0.689 MPa -
典型数据
加工方法
注塑
供货形式
粒料
特殊性能
经耐紫外线处理的/耐气候的
特征
共聚物
Certifications
RoHS
应用
电子电气
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.