Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastosil® R 570/60 - VMQ - Wacker Chemie AG

Material Data Center offers the following functions for Elastosil® R 570/60:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastosil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
拉伸强度 7 MPa ISO 527
断裂伸长率 >50 % ISO 527
肖氏硬度A 62 - ISO 7619-1
ASTM数据
撕裂强度 13 kN/m ASTM D 624
电性能价值单位Test Standard
ISO数据
体积电阻率 0.038 Ohm*m IEC 62631-3-1
其它性能价值单位Test Standard
密度 1120 kg/m³ ISO 1183
典型数据
加工方法
模压成型
供货形式
黑色
特殊性能
提高导电性, 经热稳处理的/耐热的
特征
可交联的
应用
电子电气
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.