Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYLITE® Resist ZK-X - PMMA - Evonik CYRO LLC

Material Data Center offers the following functions for ACRYLITE® Resist ZK-X:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Acrylite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 1 g/10min ASTM D 1238
温度 230 °C -
负载 3.8 kg -
模压收缩率, 平行 0.0055 mm/mm ASTM D 955
机械性能价值单位Test Standard
ASTM数据
拉伸模量 2500 MPa ASTM D 638
拉伸强度 64.1 MPa ASTM D 638
屈服伸长率 5 % ASTM D 638
断裂伸长率 25 % ASTM D 638
弯曲模量 2500 MPa ASTM D 790
弯曲强度 103 MPa ASTM D 790
洛克硬度 M 70 - ASTM D 785
悬臂梁缺口冲击强度, 1/4 in 44.9 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 31.7 J/m ASTM D 256
温度 0 °C -
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
热释放速率, 平行 72 E-6/K ASTM D 696
维卡温度 110 °C ASTM D 1525
光学特性价值单位Test Standard
ASTM数据
雾度 1 % ASTM D 1003
光透射率 91.5 % ASTM D 1003
折射率 1.49 - ASTM D 542
其它性能价值单位Test Standard
吸水率, 平衡 0.3 % ASTM D 570
密度 1160 kg/m³ ASTM D 792
Bulk Density 710 kg/m³ -
典型数据
加工方法
注塑, 片材挤出成型, 其它挤出成型
特殊性能
高冲击韧性的/经抗冲改性的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
特征
无定形, 颜色稳定性, 光导
耐化学试剂
耐环境应力裂纹性
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.