Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYLITE® Heatresist hw55 - PMMA - Evonik CYRO LLC

Material Data Center offers the following functions for ACRYLITE® Heatresist hw55:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Acrylite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 1.2 cm³/10min ISO 1133
温度 230 °C -
载荷 3.8 kg -
模塑收缩率, 平行 0.4 % ISO 294-4, 2577
ASTM数据
熔融指数, MFI 1.3 g/10min ASTM D 1238
温度 230 °C -
负载 3.8 kg -
模压收缩率, 平行 0.0095 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
拉伸模量 3600 MPa ISO 527
断裂应力 80 MPa ISO 527
断裂伸长率 3.5 % ISO 527
简支梁冲击强度, +23°C 20 kJ/m² ISO 179/1eU
ASTM数据
拉伸模量 3800 MPa ASTM D 638
拉伸强度 86 MPa ASTM D 638
屈服伸长率 3 % ASTM D 638
断裂伸长率 3 % ASTM D 638
弯曲模量 3500 MPa ASTM D 790
弯曲强度 137 MPa ASTM D 790
洛克硬度 M 100 - ASTM D 785
悬臂梁缺口冲击强度, 1/4 in 13 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 106 °C ISO 75-1/-2
热变形温度, 0.45 MPa 109 °C ISO 75-1/-2
维卡软化温度, B 120 °C ISO 306
线性热膨胀系数, 平行 64 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
ASTM数据
热释放速率, 平行 101 E-6/K ASTM D 696
维卡温度 119 °C ASTM D 1525
光学特性价值单位Test Standard
ISO Data
透光率 91 % ISO 13468-1, -2
ASTM数据
雾度 1 % ASTM D 1003
光透射率 91 % ASTM D 1003
其它性能价值单位Test Standard
吸水性 2.2 % 类似ISO 62
吸湿性 0.6 % 类似ISO 62
密度 1190 kg/m³ ISO 1183
吸水率, 平衡 0.3 % ASTM D 570
密度 1190 kg/m³ ASTM D 792
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料
特殊性能
经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
特征
光导, 熔体强度
耐化学试剂
通用耐化学性
应用
汽车, 药物
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.