Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of P84®UHT 15G 10P DF - PI-(CD+Z) - Evonik Operations GmbH

Material Data Center offers the following functions for P84®UHT 15G 10P DF:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other P84 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта

High temperature resistance, graphite filled (15%), PTFE filled (10%) Polyimide

Polyimid P84®UHT - at a glance

 

  • Excellent thermal-oxidative stability (use up to 300 ° C)
  • High mechanical strength and dimensional stability even at very high temperatures
  • Good creep resistance under load even at high temperatures
  • Easy machinability with standard tools for metals
  • Excellent tribological properties, high wear resistance
  • Processing by direct forming

 

 

Application examples

bushings, seals, bearings components, guides, gear wheels, and valve parts

in the automotive and aerospace industries and in industrial equipment.

For further information please visit WWW.P84.COM.

Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 4080 МПа ISO 527
Напряжение при разрыве 52 МПа ISO 527
Удлинение при разрыве 2.5 % ISO 527
Твердость по Шору D 80 - ISO 7619-1
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1480 кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Литьевое прессование
Вид поставки
Порошок
Добавки
Смазочные добавки, Добавка, улучшающая съем изделия с пресс-формы
Особые показатели
Термостабилизированный или стойкий к воздействию тепла
Специальные характеристики
Сопротивление ползучести, Термостойкость, Трибологический сорт
Химическая стойкость
Стойкость к окислению
Применение
Авиа- и ракетостроение, Автомобилестроение
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.