Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LUTENE XL2808BK - PE - LG Chem

Material Data Center offers the following functions for LUTENE XL2808BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lutene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Электрические свойства - Прочие свойства - Рекомендации по переработке экструзией
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
LUTENE® XL2808BK has an excellent electrical properties and assists in obtaining a minimum shrink back on aluminum conductor, especially solid conductor. LUTENE® XL2808BK is specifically developed to provide a smooth surface yielding a more perfect interface between the extruded shield and the insulation.

LUTENE® XL2808BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor.

Механические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Предел прочности на разрыв 16.7 МПа ASTM D 638
Относительное удлинение при разрыве 200 % ASTM D 638
Электрические свойстваЗначениеЕдиницаСтандарт
Other Standards[S]
Удельное объемное сопротивление 100 Ом*см ASTM D991
S: These properties are reported by the producer according standards that are different to our defaults.
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1140 кг/м³ ASTM D 792
Содержание влаги 0.05 % -
Рекомендации по переработке экструзиейЗначениеЕдиницаСтандарт
Температура предварительной сушки 60 - 70 °C -
Время предварительной сушки 4 h -
Температура расплава 100 - 125 °C -
Особые свойства и характеристики
Способы переработки
Экструзия (прочие виды)
Вид поставки
Черный
Специальные характеристики
Сшивающийся, Электромагнитное затухание / Экранирование
Применение
Электрические и электронные устройства
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.