Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LIM® 6030 - VMQ - Momentive Performance Materials Inc.

Material Data Center offers the following functions for LIM® 6030:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other LIM datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Appearance/Color:
liquid, transparent

Characteristics:
fast cure, high tear strength

Conformity:
The product meets the requirements for passing the test standards USP Class VI, FDA 21 CFR 177.2600 and ISO 10993.
Based on listing of ingredients in the BfR recommendation XV "Silicones", the product is compositionally compliant.

These values were determined with the following conditions:
Postbaked 1 hr @ 204ºC / 400ºF.

Other values were achieved with the following conditions:
As Molded 30 sec @ 177ºC / 350ºF:


Property Value Unit Standard
Shore A hardness, 3s 30 - ISO 868
Tensile Strength 8.3 MPa
 ISO 37
Strain at break 750 %
 ISO 37
Tear Strength 28.1 kN/m
 ASTM D 624
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
предел прочности при растяжении 9 МПа ISO 37
Удлинение при разрыве 675 % ISO 37
Твердость по Шору А 35 - ISO 7619-1
Данные ASTM
Стойкость к разрыву 31 кН/м ASTM D 624
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Поведение при горении образца 1.5 мм ном. толщины HB класс IEC 60695-11-10
желтая карточка (Yellow Card) да - -
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1120 кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Литье под давлением
Особые показатели
Прозрачный
Сертификаты
Контакт с пищей, Одобрен для контакта с пищей BfR, Одобрен для контакта с пищей FDA 21 CFR, Одобрено Фармокопией США, класс VI
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.