Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of PEEK-OPTIMA® Wear Performance LV - PEEK - Invibio® Biomaterial Solutions

Material Data Center offers the following functions for PEEK-OPTIMA® Wear Performance LV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Peek-Optima datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Напряжение в точке текучести 155 МПа ISO 527
Удлинение при разрыве 2 % ISO 527
Модуль упругости при изгибе, 23°C 15000 МПа ISO 178
Ударная вязкость по Изоду, +23°C 30 кДж/м2 ISO 180/1U
Ударная вязкость по Изоду образцов с надрезом, +23°C 5.5 кДж/м2 ISO 180/1A
Данные ASTM
Твердость по Роквеллу M 105 - ASTM D 785
Прочие свойстваЗначениеЕдиницаСтандарт
Водопоглощение 0.5 % Sim. to ISO 62
Плотность 1420 кг/м³ ISO 1183
Особые свойства и характеристики
Вид поставки
Мелкие гранулы, Черный
Применение
Медицинского назначения
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.