Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin CN5258 - Asia - (PPE+PS)-X40 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin CN5258 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
NORYL™ CN5258 resin is a 40% filled blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This high modulus, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VB at 2mm and V1 at 1.5mm. NORYL CN5258 resin exhibits good dimensional stability, low moisture absorption, high rigidity and is an excellent candidate for printer chassis applications.

UL Yellow Card Link E207780-228542
Механические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Модуль упругости при изгибе 10000 МПа ASTM D 790
Предел прочности при изгибе 158 МПа ASTM D 790
Ударная вязкость (Izod) с надрезом, образец с надрезом, 1/8 in или 3,17 мм 68 J/m ASTM D 256
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Поведение при горении образца 1.5 мм ном. толщины V-1 класс IEC 60695-11-10
Толщина образца 1.5 мм -
Класс горючести 5V при толщине образца h 5VB класс IEC 60695-11-20
Толщина образца 2.0 мм -
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1420 кг/м³ ASTM D 792
Особые свойства и характеристики
Способы переработки
Литье под давлением
Добавки
Антипирен
Особые показатели
Огнестойкий
Доступность материала по регионам
Страны Азии и Тихого океана
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.