Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Biomer® P226 - PHB - Biomer

Material Data Center offers the following functions for Biomer® P226:
unit conversion, PDF datasheet print, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Biomer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Показатель текучести расплава, ПТР 9.5 см³/10мин ISO 1133
Температура 180 °C -
Нагрузка 5 kg -
Показатель текучести расплава, ПТР 10 г/10 мин ISO 1133
Температура 180 °C -
Нагрузка 5 kg -
Усадка при литье, продольная 1.2 % ISO 294-4, 2577
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 1520 МПа ISO 527
предел прочности при растяжении 25.5 МПа ISO 527
Ударная прочность по Шарпи, +23°C N кДж/м2 ISO 179/1eU
Ударная прочность по Шарпи, -30°C 30 кДж/м2 ISO 179/1eU
Ударная прочность по Шарпи с надрезом, +23°C 2.7 кДж/м2 ISO 179/1eA
Ударная прочность по Шарпи с надрезом, -30°C 1.4 кДж/м2 ISO 179/1eA
Твердость по Шору D 67 - ISO 7619-1
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура изгиба под нагрузкой, 1.80 МПа 59 °C ISO 75-1/-2
Температура размягчения по Вика, A 147 °C ISO 306
Прочие свойстваЗначениеЕдиницаСтандарт
Поглощение влаги 0.4 % Sim. to ISO 62
Плотность 1250 кг/м³ ISO 1183
Рекомендации по переработке литьем под давлениемЗначениеЕдиницаСтандарт
Температура предварительной сушки 60 °C -
Время предварительной сушки 2 h -
Температура формы 30 - 55 °C -
Особые свойства и характеристики
Способы переработки
Литье под давлением, Экструзия (прочие виды)
Вид поставки
Гранулы
Специальные характеристики
Высокая кристалличность
Сертификаты
Содержит возобновляемые ресурсы, Биоразлагаемый
Доступность материала по регионам
Европа
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.