Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® RB006S - PA66-GB30 - Ascend

Material Data Center offers the following functions for Vydyne® RB006S:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Vydyne RB006S is a 30% glass bead reinforced PA66 for injection molded applications.
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 4500 / - MPa ISO 527
Tensão na ruptura 80 / - MPa ISO 527
Deformação na ruptura 9 / - % ISO 527
Resistência ao impacto Charpy , +23°C 30 / - kJ/m² ISO 179/1eU
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Coef. de expansão térmica linear, paralelo 40 / * E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 40 / * E-6/K ISO 11359-1/-2
Flamabilidade conforme índice de oxigênio 26 / * % ISO 4589-1/-2
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.