Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of THERMOLAST® M TM5MED - TPE - KRAIBURG TPE GmbH & Co. KG

Material Data Center offers the following functions for THERMOLAST® M TM5MED:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Thermolast datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Typical Markets/ Application Sectors:
•    Medical application

Application Examples:
•    Seals
•    Mouthpieces
•    Valves
•    Soft touch
•    Flexible connections
•    Medical tubes

Material Advantage:
•    Applicaton up to indirect blood contact
•    Tested acord. USP Class IV and ISO 10993-5
•    Tested according to ISO 10993-11, ISO 10993- 10, USP 6.6.1
•    Adhesion to PP und HDPE
•    Adapted for injection moulding and extrusion
•    Very good compression set
•    sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 10 MPa ISO 37
Deformação na ruptura 850 % ISO 37
Deformação permanente por compressão a 70°C, 24h 32 % ISO 815
Deformação permanente por compressão a 100°C, 24h 46 % ISO 815
Resistência ao rasgamento 14.5 kN/m ISO 34-1
Dureza Shore A 46 - ISO 7619-1
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 880 kg/m³ ISO 1183
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 60 - 80 °C -
Pré-secagem - tempo 2 - 4 h -
Temperatura da massa 200 - 250 °C -
Temperatura do molde 25 - 40 °C -
Zona 1 180 - 200 °C -
Zona 2 200 - 220 °C -
Zona 3 220 - 250 °C -
Pressão de injeção 20 - 100 MPa -
Contrapressão 2 - 10 MPa -
Pressão de recalque 8 - 60 MPa -
Tempo de residência máximo 10 min -
Características
Processamento
Moldagem por injeção, Outros tipos de extrusão
Características especiais
Translucent, Esterilizável, Esterilização por óxido de etileno (EtO), Esterilização a vapor, Gamma irradiation sterilization
Características
Boa adesão, Soft Feel, Soldável
Resistência Química
Resistência à radiação
Certifications
Grau médico, Biocompatibility ISO 10993, USP Class VI, Drug Master File, Long term supply assurance, RoHS, REACH
Aplicaciones
Médico
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.