Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Butyrate 576E3720010 - CAB - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Butyrate 576E3720010:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with  plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Butyrate 576-10 contains an odor mask and an ultra-violet inhibitor(UVI). It has a plasticizer level of 10%.




Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.004 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração no escoamento 33.1 MPa ASTM D 638
Resistência à tração na ruptura 43.4 MPa ASTM D 638
Deformação na ruptura 50 % ASTM D 638
Módulo de flexão 1379 MPa ASTM D 790
Dureza Rockwell R 78 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 240 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 96 J/m ASTM D 256
Temperatura -40 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
Coeficiente de expansão térmica, long. 140 E-6/K ASTM D 696
DTUL @ 66 psi 85 °C ASTM D 648
DTUL @ 264 psi 74 °C ASTM D 648
Temperatura de amolecimento Vicat 104 °C ASTM D 1525
Condutividade térmica, estado sólido 0.036 W/(m K) ASTM C 177
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência elétrica, tempo curto 15.3 kV/mm ASTM D 149
Fator de dissipação dielétrica, 1 MHz 0.08 - ASTM D 150
Constante dielétrica, 1 MHz 3.55 - ASTM D 150
Resistividade volumétrica específica 1E15 Ohm*cm ASTM D 257
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 8.5 % ASTM D 1003
Índice de refração 1.48 - ASTM D 542
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 1.4 % ASTM D 570
Densidade 1190 kg/m³ ASTM D 792
Características
Processamento
Extrusão de perfis
Aditivos
Plastificante
Características especiais
Estabilidade a raios U.V./Intempéries, Transparente
Características
High Gloss, Baixo odor
Certifications
Contém recursos renováveis
Aplicaciones
Automóvel, IT / Máquina de escritório, Elétrica e Eletrônica, Embalaje, Equipo deportivo, Brinquedos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.