Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taroblend 50 X0 - (PC+ABS) - Taro Plast S.p.A.

Material Data Center offers the following functions for Taroblend 50 X0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2600 MPa ISO 527
Tensão no escoamento 60 MPa ISO 527
Deformação na ruptura 30 % ISO 527
Módulo de flexão, 23°C 2450 MPa ISO 178
Resistência ao impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 20 kJ/m² ISO 179/1eA
ASTM Dados
Resistência ao Impacto Izod, 1/8 in 350 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 85 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 116 °C ISO 306
Coef. de expansão térmica linear, paralelo 70 E-6/K ISO 11359-1/-2
ASTM Dados
UL94 flamabilidade V-0 - UL 94
Espessuras do tubo de teste 1.7 mm -
Índice de oxigênio 32 % ASTM D 2863
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.65 % Sim. to ISO 62
Densidade 1180 kg/m³ ISO 1183
Características
Características especiais
Retardante de chama, Estabilidade a raios U.V./Intempéries
Características
Baixo odor
Aplicaciones
Automóvel, Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.