Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Taroblend 45 - (PC+ABS) - Taro Plast S.p.A.

Material Data Center offers the following functions for Taroblend 45:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Taroblend datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 17 g/10min ISO 1133
Temperatura 260 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2000 MPa ISO 527
Tensão no escoamento 46 MPa ISO 527
Deformação na ruptura 30 % ISO 527
Módulo de flexão, 23°C 2150 MPa ISO 178
Resistência ao impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 40 kJ/m² ISO 179/1eA
ASTM Dados
Impacto Izod com entalhe, 1/8 in 450 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 100 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 127 °C ISO 306
Temperatura de amolecimento Vicat, B 120 °C ISO 306
Coef. de expansão térmica linear, paralelo 65 E-6/K ISO 11359-1/-2
ASTM Dados
UL94 flamabilidade HB - UL 94
Espessuras do tubo de teste 1.6 mm -
Índice de oxigênio 22 % ASTM D 2863
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E13 Ohm*m IEC 62631-3-1
Resistência elétrica 24 kV/mm IEC 60243-1
Índice comparativo de linha de fuga 550 - IEC 60112
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.6 % Sim. to ISO 62
Densidade 1120 kg/m³ ISO 1183
Características
Características especiais
Estabilidade a raios U.V./Intempéries
Características
Baixo odor, Estabilidade térmica
Aplicaciones
Automóvel, Elétrica e Eletrônica
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.