Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SUPREME SC 201 E - PS - Supreme Petrochem Ltd

Material Data Center offers the following functions for SUPREME SC 201 E:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Supreme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 1.5 g/10min ASTM D 1238
Temperatura 200 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração 53 MPa ASTM D 638
Módulo de flexão 3000 MPa ASTM D 790
Resistência à flexão 98 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 18 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade HB - UL 94
Espessuras do tubo de teste 1.6 mm -
DTUL @ 264 psi 87 °C ASTM D 648
Temperatura de amolecimento Vicat 106 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1040 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 50 - 80 °C -
Pré-secagem - tempo 2 h -
Temperatura da massa 180 - 260 °C -
Temperatura do molde 40 - 60 °C -
Características
Processamento
Moldagem por injeção, Extrusão de chapas, Outros tipos de extrusão
Características especiais
Estável contra o calor
Características
Resistência de derreta
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR, RoHS
Aplicaciones
Polivalente, Médico, Embalaje
Disponibilidade regional
Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.