Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound 37T1020 - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound 37T1020:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
SABIC® PPcompound 37T1020 is a high flow copolymer with 20% talc, offering an excellent balance between stiffness and impact resistance. It has been specially developed for automotive interior parts such as column cladding and door panels. SABIC® PPcompound 37T1020 is a designated automotive grade. IMDS ID: 16161338
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 13 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2100 MPa ISO 527
Tensão no escoamento 28 MPa ISO 527
Deformação no escoamento 3.5 % ISO 527
Tensão na ruptura 25 MPa ISO 527
Deformação na ruptura 45 % ISO 527
Módulo de flexão, 23°C 2650 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 3 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 1 kJ/m² ISO 179/1eA
Impacto Izod com entalhe 3 kJ/m² ISO 180/1A
ASTM Dados
Módulo de tração 2450 MPa ASTM D 638
Resistência à tração no escoamento 25 MPa ASTM D 638
Resistência à tração na ruptura 17 MPa ASTM D 638
Alongamento no escoamento 3.7 % ASTM D 638
Deformação na ruptura 32.8 % ASTM D 638
Módulo de flexão 2350 MPa ASTM D 790
Dureza Shore D 71 - ASTM D 2240
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 69 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 110 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 145 °C ISO 306
ASTM Dados
DTUL @ 66 psi 116 °C ASTM D 648
DTUL @ 264 psi 60 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1040 kg/m³ ISO 1183
Densidade 1050 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 80 - 100 °C -
Pré-secagem - tempo 2 - 4 h -
Temperatura da massa 210 - 270 °C -
Temperatura do molde 15 - 60 °C -
Zona 1 190 - 230 °C -
Zona 2 200 - 250 °C -
Zona 3 210 - 270 °C -
Temperatura do bico 210 - 270 °C -
Contrapressão 1 - 1.5 MPa -
Características
Características
Copolímero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.