Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin ENG265F - Americas - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin ENG265F - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
NORYL™ ENG265F resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This material is suitable for profile extrusion and exhibits very good hydrolytic stability, low moisture absorption, good dimensional stability. NORYL ENG265F resin certifies to NSF 61 and is an excellent candidate for water management applications such as extruded tubes for reverse osmosis systems.

UL Yellow Card Link E121562-221150
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 8 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 5 kg -
ASTM Dados
Índice de fluidez, MFI 8.5 g/10min ASTM D 1238
Temperatura 280 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2550 MPa ISO 527
Tensão no escoamento 55 MPa ISO 527
Deformação no escoamento 3.1 % ISO 527
Tensão na ruptura 50 MPa ISO 527
Deformação na ruptura 27 % ISO 527
Módulo de flexão 2500 MPa ISO 178
Resistência à flexão 95 MPa ISO 178
Res. impacto Izod c/entalhe, +23°C, 4mm 13 kJ/m² ISO 180/1A
Res. impacto Izod c/entalhe, -30°C, 4mm 8 kJ/m² ISO 180/1A
ASTM Dados
Módulo de tração 2400 MPa ASTM D 638
Resistência à tração no escoamento 56 MPa ASTM D 638
Resistência à tração na ruptura 50 MPa ASTM D 638
Alongamento no escoamento 3.3 % ASTM D 638
Deformação na ruptura 28 % ASTM D 638
Módulo de flexão 2550 MPa ASTM D 790
Dureza Rockwell R 119 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 186 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 114 J/m ASTM D 256
Temperatura -30 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de amolecimento Vicat, B 137 °C ISO 306
Temperatura de amolecimento Vicat, 120°C/h 50N 141 °C ISO 306
Flamabilidade a 1.5mm esp. nom. HB class IEC 60695-11-10
Espessuras do tubo de teste 1.5 mm -
ASTM Dados
DTUL @ 66 psi 132 °C ASTM D 648
DTUL @ 264 psi 118 °C ASTM D 648
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência elétrica, tempo curto 19.7 kV/mm ASTM D 149
Fator de dissipação dielétrica, 60 Hz 0.0004 - ASTM D 150
Constante dielétrica, 60 Hz 2.65 - ASTM D 150
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1060 kg/m³ ASTM D 792
Características
Resistência Química
Estabilidade hidrolítica
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.