Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FARBOSET® 5000 Black - EP-(MX+GX) - Cosmic Plastics Inc.

Material Data Center offers the following functions for FARBOSET® 5000 Black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Farboset datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.006 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração 65.5 MPa ASTM D 638
Resistência à compressão 283 MPa ASTM D 695
Módulo de flexão 13440 MPa ASTM D 790
Resistência à flexão 114 MPa ASTM D 790
Dureza Shore D 75 - ASTM D 2240
Impacto Izod com entalhe, 1/8 in 16 J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade HB - UL 94
Espessuras do tubo de teste 1.59 mm -
Temp. de transição vítrea 150 °C ASTM E 1356
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência elétrica, tempo curto 15.7 kV/mm ASTM D 149
Resistividade volumétrica específica >1E15 Ohm*cm ASTM D 257
Resistência ao arco 180 s ASTM D 495
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 0.04 % ASTM D 570
Densidade 1880 kg/m³ ASTM D 792
Características
Forma de entrega
Granulado
Aplicaciones
Elétrica e Eletrônica, Encapsulamento
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.