Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Diakon Frost 902 51 - PMMA - Lucite International

Material Data Center offers the following functions for Diakon Frost 902 51:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Diakon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 5.5 g/10min ISO 1133
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 80 MPa ISO 527
Deformação na ruptura 5 % ISO 527
Módulo de flexão, 23°C 3100 MPa ISO 178
Resistência ao impacto Charpy, +23°C 11 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 1.7 kJ/m² ISO 179/1eA
Impacto Izod com entalhe, +23°C 1.3 kJ/m² ISO 180/1A
Dureza Rockwell M 88 - ISO 2039-2
Ball indentation hardness 180 MPa ISO 2039-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 97 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 100 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 108 °C ISO 306
Temperatura de amolecimento Vicat, B 102 °C ISO 306
Flamabilidade a espessura h HB class IEC 60695-11-10
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 66 % ASTM D 1003
Transmitância luminosa 74 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.3 % Sim. to ISO 62
Densidade 1190 kg/m³ ISO 1183
Densidade 1190 kg/m³ ASTM D 792
Características
Processamento
Outros tipos de extrusão
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.