Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Clyrell RC215M - PP - LyondellBasell Industries

Material Data Center offers the following functions for Clyrell RC215M:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Clyrell datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 10 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1050 MPa ISO 527
Tensão no escoamento 27 MPa ISO 527
Deformação no escoamento 10 % ISO 527
Deformação na ruptura >50 % ISO 527
Res. impacto Charpy c/entalhe, +23°C 3.4 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 1.5 kJ/m² ISO 179/1eA
Dureza Shore D 66 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica , 0.45 MPa 65 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 130 °C ISO 306
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 90 - ASTM D 2457
Haze 1 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 900 kg/m³ ISO 1183
Propriedades do filmeValorUnidadeMétodo de ensaio
ASTM Data
Resistência à tração no escoamento, long. 22 MPa ASTM D 882
Resistência à tração na ruptura, long. 35 MPa ASTM D 882
Alongamento no escoamento, long. 10 % ASTM D 882
Deformação na ruptura, long. 750 % ASTM D 882
Tipo de extrusão cast - -
Espessura de corpo de prova 0.05 mm -
Características
Processamento
Extrusão de laminas
Aditivos
Agente antibloqueio
Características
Heat Sealable, Soldável, Copolímero, Copolímero aleatório
Certifications
Contacto com alimentos, Aprobación del 1935/2004/EG, Aprovação para contacto com alimentos10/2011, Aprovação de alimentos FDA 21 CFR
Aplicaciones
Embalaje
Disponibilidade regional
Europa, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.