Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Treva™ GC6011NAT - CAP - Eastman Chemical Co.

Material Data Center offers the following functions for Treva™ GC6011NAT:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Treva datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman TREVA™ is a cellulose-based engineering bioplastic that offers both high performance and enables exceptional depth of color and high gloss for opaque applications. TREVA is chemically resistant, dimensionally stable and has excellent flow, BPA-free and enables exceptional depth of color and high gloss for opaque

applications.

Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.007 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração no escoamento 55 MPa ASTM D 638
Resistência à tração na ruptura 51 MPa ASTM D 638
Deformação na ruptura 21 % ASTM D 638
Módulo de flexão 2160 MPa ASTM D 790
Dureza Rockwell R 108 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 82 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 66 J/m ASTM D 256
Temperatura -40 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 116 °C ASTM D 648
DTUL @ 264 psi 102 °C ASTM D 648
Temperatura de amolecimento Vicat 131 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Biobased content 45 % -
Absorção de água, 24hr 2.3 % ASTM D 570
Densidade 1230 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 75 °C -
Pré-secagem - tempo 4 h -
Temperatura da massa 260 °C -
Temperatura do molde 85 °C -
Velocidade de injeção 30 mm/s -
Tempo de residência máximo 4 min -
Características
Processamento
Moldagem por injeção
Forma de entrega
Cor natural
Características especiais
Opaque
Características
High Gloss, Birrefringência baixa
Resistência Química
Resistência química geral
Certifications
Contém recursos renováveis
Aplicaciones
Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.