Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Provista™ MP002 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Provista™ MP002:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Provista datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Eastman Provista™ Copolymer MP002 is a resin specifically developed for extrusion into profiles for medical applications where aesthetics such as high clarity and gloss, coupled with design flexibility and enhanced toughness, drive demand. Compared to commonly used materials, Eastman Provista™ copolymer runs on most standard processing equipment at increased speeds. Extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. In addition to profile extrusion, Eastman Provista™ copolymer is an excellent choice for extrusion of rigid tubing. This product meets the biocompatibility requirements under FDA/ISO 10993 and USP Class 6, Plastics.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.003 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 1900 MPa ASTM D 638
Resistência à tração no escoamento 47 MPa ASTM D 638
Resistência à tração na ruptura 48 MPa ASTM D 638
Alongamento no escoamento 5 % ASTM D 638
Deformação na ruptura 300 % ASTM D 638
Módulo de flexão 1900 MPa ASTM D 790
Resistência à flexão 65 MPa ASTM D 790
Dureza Rockwell R 105 - ASTM D 785
Impacto Izod com entalhe, 1/8 in N J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 63 J/m ASTM D 256
Temperatura -40 °C -
Resistência ao Impacto Izod, 1/8 in N J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 63 °C ASTM D 648
Temperatura de amolecimento Vicat 85 °C ASTM D 1525
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 143 - ASTM D 2457
Haze 1.3 % ASTM D 1003
Transmitância luminosa 91 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1250 kg/m³ ASTM D 792
Características
Processamento
Extrusão de tubos, Extrusão de perfis
Características especiais
Transparente
Características
High Gloss, Resistência de derreta, Copolímero
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR, Grau médico, Biocompatibility ISO 10993, USP Class VI
Aplicaciones
Médico
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.