Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of OnFlex™ S EH 80A-3S7005 - TPS - Avient Corporation

Material Data Center offers the following functions for OnFlex™ S EH 80A-3S7005:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Onflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Deformação na ruptura 500 % ISO 37
Deformação permanente por compressão a 23°C, 24h 39 % ISO 815
Deformação permanente por compressão a 70°C, 24h 70 % ISO 815
Deformação permanente por compressão a 100°C, 24h 88 % ISO 815
Resistência ao rasgamento 33 kN/m ISO 34-1
Dureza Shore A 80 - ISO 7619-1
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1200 kg/m³ ISO 1183
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Temperatura da massa 180 - 220 °C -
Temperatura do molde 30 - 60 °C -
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Características
Copolímero
Aplicaciones
Automóvel, Polivalente
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.