Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Mater-Bi DI01A - PSAC... - Novamont S.p.A

Material Data Center offers the following functions for Mater-Bi DI01A:
unit conversion, PDF datasheet print

Check here, which other Mater-Bi datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Condutividade térmica do fundido 0.21 W/(m K) -
Capacidade térmica específica do fundido 1800 J/(kg K) -
ASTM Dados
Índice de fluidez, MFI 35 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Contração após a moldagem, paralelo 0.003 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência ao Impacto Izod, +23°C 46 kJ/m² ISO 180/1U
Impacto Izod com entalhe, +23°C 4 kJ/m² ISO 180/1A
ASTM Dados
Módulo de tração 2700 MPa ASTM D 638
Resistência à tração 48 MPa ASTM D 638
Resistência à tração na ruptura 20 MPa ASTM D 638
Alongamento no escoamento 2.5 % ASTM D 638
Deformação na ruptura 22 % ASTM D 638
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
Temperatura de fusão 160 °C ASTM D 3418
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1200 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Certifications
Contém recursos renováveis, Biodegradável
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.