Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ecovio® F23B1 - (PBAT+PLA) - BASF

Material Data Center offers the following functions for ecovio® F23B1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecovio datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Outras propriedades - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 8 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 5 kg -
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1380 kg/m³ ISO 1183
Bulk density 800 kg/m³ -
Propriedades do filmeValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração, paralelo 260 MPa ISO 527-3
Módulo de tração, perpend. 130 MPa ISO 527-3
Tensão Máxima, paralelo 25 MPa ISO 527-3
Tensão Máxima, perpend. 25 MPa ISO 527-3
Deformação Máxima, paralelo 480 % ISO 527-3
Deformação Máxima, perpend. 570 % ISO 527-3
Resistência ao rasgamento Elmendorf, paralelo 1.3 N ISO 6383-2
Resistência ao rasgamento Elmendorf, perpend. 0.9 N ISO 6383-2
Tipo de extrusão blown - -
Espessura de corpo de prova 0.025 mm -
Características
Processamento
Extrusão de filme soprado, Extrusão de laminas
Forma de entrega
Granulos
Aditivos
Agente antibloqueio
Características
Baixo odor, Resistência de derreta, Estabilidade térmica, Soldável
Certifications
Contém recursos renováveis, Biodegradável, Contacto com alimentos, Compostable ISO 13432 (Produtor), Compostable ASTM D6400 (Produtor), Compostable ISO 13432 (Certificado), Compostable ASTM D6400 (Certificado)
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.