Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® FG500SC NC010 - POM-Z - DuPont Engineering Polymers

Material Data Center offers the following functions for Delrin® FG500SC NC010:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.


Delrin® FG500SC is a masterbatch of 20% silicone fluid in Delrin® FG500P.  It is designed for cube-blending with any grade of Delrin® for applications requiring low wear and friction against itself and other plastics. It has been developed for applications in contact with food.

The below data reflect the properties of a 10% Delrin® FG500SC NC010 letdown in Delrin® FG500P NC010 blend.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 3000 MPa ISO 527
Tensão no escoamento 66 MPa ISO 527
Deformação no escoamento 21 % ISO 527
Deformação nominal na ruptura 40 % ISO 527
Resistência ao impacto Charpy , +23°C 270 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 8.5 kJ/m² ISO 179/1eA
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 176 °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 96 °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 158 °C ISO 75-1/-2
Coef. de expansão térmica linear, paralelo 100 E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 110 E-6/K ISO 11359-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1410 kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos, Cor natural
Aditivos
Lubrificantes, Desmoldante
Características
Mistura de resina
Certifications
Contacto com alimentos
Disponibilidade regional
Outras informações
Moldagem por injeção
PROCESSING
As a first indication, please use molding parameters of the product with which Delrin® FG500SC is blended.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.