Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Filament AM1010F - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Filament AM1010F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
3D Data
Any use of this information falls under the rules of our disclaimer.
제품 설명서
ULTEM™ AM1010F filament is a polyetherimide product for 3D printing applications manufactured from ULTEM™ 1010 resin. The filament provides high heat resistance and mechanical strength, is UL94 V-0 compliant at 1.5 mm and 5VA compliant at 3.0 mm.
3D Data값단위시험규격
Other Standards[S]
인장탄성률, flat 2750 MPa ASTM D 638
인장탄성률, on-edge 2870 MPa ASTM D 638
인장탄성률, upright 2840 MPa ASTM D 638
파단시 강도, flat 73 MPa ASTM D 638
파단시 강도, on-edge 80 MPa ASTM D 638
파단시 강도, upright 34 MPa ASTM D 638
파단시 신율 , flat 4 % ASTM D 638
파단시 신율 , on-edge 3.8 % ASTM D 638
파단시 신율 , upright 1.3 % ASTM D 638
굴곡 계수, flat 2520 MPa ASTM D 790
굴곡 계수, on-edge 2840 MPa ASTM D 790
굴곡 계수, upright 2380 MPa ASTM D 790
하중하에서의 변형온도, 1.80 MPa, flat 211 °C ASTM D 6484
하중하에서의 변형온도, 1.80 MPa, on-edge 210 °C ASTM D 6484
하중하에서의 변형온도, 1.80 MPa, upright 208 °C ASTM D 6484
비카트 연화 온도, B, flat 220 °C ASTM D 1525
비카트 연화 온도, B, on-edge 220 °C ASTM D 1525
비카트 연화 온도, B, upright 220 °C ASTM D 1525
선형 열팽창 계수, 평행, flat 51 E-6/K ASTM E 831
선형 열팽창 계수, 평행, on-edge 53 E-6/K ASTM E 831
선형 열팽창 계수, 평행, upright 53 E-6/K ASTM E 831
선형 열팽창 계수, 수직, flat 53 E-6/K ASTM E 831
선형 열팽창 계수, 수직, on-edge 52 E-6/K ASTM E 831
선형 열팽창 계수, 수직, upright 53 E-6/K ASTM E 831
두께 H인 제품의 난연성, flat V-0 class UL 94
두께 H인 제품의 난연성, on-edge V-0 class UL 94
두께 H인 제품의 난연성, upright V-0 class UL 94
테스트 두께 1.5 mm UL 94
부피 저항, flat 6.24E12 Ohm*m ASTM D 257
부피 저항, on-edge 1.26E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
특별 특성
열안정성
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.