Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin HU2300 - PEI-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin HU2300:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
ULTEM HU2300 resin is a standard flow 30% glass Fiber reinforced polyetherimide resin. The intended use for this material is in medical devices and pharmaceutical applications. The material offers biocompatibility (ISO 10993 or USP Class VI) and Healthcare management of change applies. The material may offer Steam-, Hydrogen Peroxide-, Gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It may offer global food compliance (FDA, CN, EC). The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers. It offers UL94 V0 and 5VA ratings. The material can also offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 6 cm³/10min ISO 1133
온도 360 °C -
하중 5 kg -
ASTM 데이터
용융 흐름성, MFI 5 g/10min ASTM D 1238
온도 337 °C -
하중 6.6 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 10500 MPa ISO 527
파단시 강도 175 MPa ISO 527
파단시 신율 2.4 % ISO 527
굴곡 계수, 23°C 9600 MPa ISO 178
챠피 충격 강도, +23°C 40 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 40 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 10 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 10 kJ/m² ISO 179/1eA
Izod충격강도, +23°C 40 kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 10 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 10 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C 10 kJ/m² ISO 180/1A
아이조드 충격은 노치 10 kJ/m² ISO 180/1A
온도 -30 °C -
로크웰 경도 M 110 - ISO 2039-2
Ball indentation hardness 165 MPa ISO 2039-1
ASTM 데이터
인장탄성률 10400 MPa ASTM D 638
파단시 강도 175 MPa ASTM D 638
파단시 신율 2.5 % ASTM D 638
굴곡 계수 9700 MPa ASTM D 790
로크웰 경도 M 114 - ASTM D 785
아이조드 충격은 노치, 1/8 in 90 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 80 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in 600 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 210 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 215 °C ISO 75-1/-2
비카트 연화 온도, A 225 °C ISO 306
비카트 연화 온도, B 213 °C ISO 306
비카트 연화 온도, 120°C/h 50N 220 °C ISO 306
선형 열팽창 계수, 평행 18 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 48 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 0.2 mm -
Yellow Card 유효한 예 - -
두께가 h인 제품의 난연성 등급 5V 5VA class IEC 60695-11-20
테스트 두께 1.2 mm -
Yellow Card 유효한 예 - -
산소지수로서의 난연성 48 % ISO 4589-1/-2
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
Glow Wire Ignition Temperature (GWIT) 900 °C IEC 60695-2-13
GWIT - thickness tested (1) 2 mm -
ASTM 데이터
열팽창 계수, 평행 19 E-6/K ASTM D 696
열팽창 계수, 수직 41 E-6/K ASTM D 696
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 211 °C ASTM D 648
비카트 연화 온도 227 °C ASTM D 1525
산소지수 50 % ASTM D 2863
전기적 특성값단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.4 - IEC 62631-2-1
소산 인자, 1MHz 25 E-4 IEC 62631-2-1
부피 저항 1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
전기 압력 35 kV/mm IEC 60243-1
CTI 150 - IEC 60112
ASTM 데이터
전기 압력, 단기간의 24.8 kV/mm ASTM D 149
부피 저항 3E16 Ohm*cm ASTM D 257
아크 저항 90 s ASTM D 495
기타 특성값단위시험규격
물에서의 흡수성 0.9 % ISO 62와 유사
조건에서의 흡습성 0.5 % ISO 62와 유사
밀도 1510 kg/m³ ISO 1183
물에서의 흡수성, 24hr 0.16 % ASTM D 570
물에서의 흡수성, 평형 0.9 % ASTM D 570
밀도 1510 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
용융수지온도 350 - 410 °C -
성형온도 135 - 180 °C -
Feed temperature 80 - 120 °C -
Zone 1 330 - 400 °C -
Zone 2 340 - 410 °C -
Zone 3 345 - 420 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 1.5 MPa -
특징
생산 공정
사출 성형, 외형 압출, 시트 압출, 기타 압출
특별 특성
난연성, Halogen-free, U.V. 안정성 또는 기후 안정성, 열안정성, Opaque, 멸균, 에틸렌 산화물 멸균(EtO), 증기 멸균, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
특성
Amorphous, Creep Resistance, Good Adhesion, Low Smoke
내화학성에
General Chemical Resistance, Hydrolytically Stable, Radiation Resistance
Certifications
Food contact, Food approval FDA 21 CFR, Medical Grade, Biocompatibility ISO 10993, US Pharmacopeia Class VI Approved, RoHS
응용
의료
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.