Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin DU319 - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin DU319:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Transparent Polyetherimide blend with PET resin. Material is RoHS compliant and is also US FDA and EU Food Contact Compliant in recognized colors.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 8.1 g/10min ASTM D 1238
온도 295 °C -
하중 6.6 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 3300 MPa ISO 527
항복강도 110 MPa ISO 527
항복변형률 6 % ISO 527
파단시 강도 75 MPa ISO 527
파단시 신율 36 % ISO 527
챠피 노치드 충격 강도, +23°C 3 kJ/m² ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm 4 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 4 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 3370 MPa ASTM D 638
항복강도 110 MPa ASTM D 638
파단시 강도 82 MPa ASTM D 638
항복변형률 60 % ASTM D 638
파단시 신율 60 % ASTM D 638
아이조드 충격은 노치, 1/8 in 26 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, B 177 °C ISO 306
비카트 연화 온도, 120°C/h 50N 180 °C ISO 306
ASTM 데이터
비카트 연화 온도 181 °C ASTM D 1525
기타 특성값단위시험규격
물에서의 흡수성 0.5 % ISO 62와 유사
조건에서의 흡습성 0.17 % ISO 62와 유사
밀도 1300 kg/m³ ISO 1183
밀도 1290 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 - 150 °C -
Pre-drying - Time 4 - 8 h -
Processing humidity ≤0.02 % -
용융수지온도 300 - 330 °C -
성형온도 95 - 150 °C -
Zone 1 280 - 315 °C -
Zone 2 290 - 320 °C -
Zone 3 295 - 325 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.7 - 1.4 MPa -
특징
생산 공정
사출 성형
특별 특성
투명도
Certifications
Food contact, Food approval FDA 21 CFR, RoHS
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.