Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 2312 - Americas - PEI-GF30 - Saudi Basic Industries Corporation (SABIC)

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.

UL Yellow Card Link E121562-221100

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 열전도율	0.3	W/(m K)	-
용융 비열용량	1920	J/(kg K)	-
이형온도	208	°C	-
ASTM 데이터
용융 흐름성, MFI	10.1	g/10min	ASTM D 1238
온도	337	°C	-
하중	6.6	kg	-

기계적 특성	값	단위	시험규격
ASTM 데이터
인장탄성률	5990	MPa	ASTM D 638
파단시 강도	103	MPa	ASTM D 638
파단시 신율	3.5	%	ASTM D 638
아이조드 충격은 노치, 1/8 in	32	J/m	ASTM D 256

열적 특성	값	단위	시험규격
ISO 데이터
선형 열팽창 계수, 평행	27.3	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	33.4	E-6/K	ISO 11359-1/-2
두께 H인 제품의 난연성	V-0	class	IEC 60695-11-10
테스트 두께	0.8	mm	-

전기적 특성	값	단위	시험규격
ASTM 데이터
상대 유전율, 1 MHz	3.49	-	ASTM D 150

기타 특성	값	단위	시험규격
밀도	1510	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	150	°C	-
Pre-drying - Time	4 - 6	h	-
Processing humidity	≤0.02	%	-
용융수지온도	350 - 400	°C	-
성형온도	135 - 165	°C	-
Zone 1	330 - 400	°C	-
Zone 2	340 - 400	°C	-
Zone 3	345 - 400	°C	-
Screw speed	40 - 70	rpm	-
Back pressure	0.3 - 0.7	MPa	-

도표

특징

생산 공정

사출 성형

응용

자동차의

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.